in this present post, we have comprehensively listed the mono amplifiers for subwoofer (the cost of which does not exceed $500). We regularly update this list with models produced by the market leaders. All items in our database are selected by our editors and updated on a regular basis.
The list of the top 15 mono amplifiers for subwoofer is given on this page will absolutely help you to grab your perfect match. Without spending much time, let’s start with reviews right now!
If you want a mono amplifiers for subwoofer that has all the basic features, this top list should be your best bet. It comes with an average rating of 4 stars after more than 1200+ customer reviews and it’s one our most popular items in recent times!
If you’re looking for the mono amplifiers for subwoofer available, look no further than this list! We’ve compiled 15 of our favorite options to help make your decision easier. If there’s something specific that is on your mind or just need some advice then keep reading below:
Top 15 List of mono amplifiers for subwoofer is given below
Finding the mono amplifiers for subwoofer is very important for them to get fit. To help you find the right one, we analyzed the best-selling products on Amazon and other online retailers. We took into consideration several factors, which include ease of use, durability, weight capacity, and how much space is available in your home.
We’ve consulted top experts who have in-and-out knowledge about the mono amplifiers for subwoofer. We chose a product with amazing features you haven’t heard of before, so we could provide your shopping experience with some variety! Our team filtered more than 100+ items to get this list done just right for ya.
- 1500W Maximum Power Monoblock Amplifier
- Optimized 563-watt RMS and a max output power of 1500 watts, you can give your music a huge boost in power that will have you and your passengers partying while on the road
- Compactly built so this amplifier can fit perfectly into any trunk
- PCB Size: 78 * 60 mm (length * width); Power Range: 8-25V; Power Port: standard 5.5mm power jack
- Quality power amplifier chip, DC single power supply 8-25V working voltage, 50W (left channel) and 50W (right channel), two of channel output.
- Can use switching power supply, laptop switching power supply, battery or car power supply, etc.
- Adopt NE5532 front-facing OPAMP to buffer, better than normal amplifier.
- TPA3116D2 chip; Maximum output power: 100W high power; efficiency up to 90 percent. 100W mono subwoofer, outstanding effect.
- Subwoofer Amplifier and Full-Frequency Mono Amp：Switch to PBTL, M03 is a Full-Frequency Mono amp for driving passive speakers and powered subwoofer. Switch to SUB, M03 is a subwoofer amplifier for diving passive and powered subwoofers.
- M03 adopts the Texas Instruments TPA3255D2 chip that features an advanced integrated feedback design and proprietary high-speed gate driver error correction (PurePath Ultra-HD). This technology allows ultra low distortion across the audio band and superior audio quality.
- High Efficient Power Output up to 200Watt. M03 can provide 150 watts RMS into 4-ohm loads or 120watts to 8-ohm loads. (Note: Package comes with 32V/5A power supply, you need a more powerful power supply to get the MAX power output.
- Home Hi-Fi Amplifier with Clean Sound Quality. Built-in low pass filter for 20-300Hz subwoofers with SUB frequency control. Great amplifier to driver any bookshelf speaker or subwoofer.
- What You Get: M03 amp x1, 32V/5A power adapter x1, user manual x1, 18-Month global warranty, our worry-free 18-month warranty, and friendly customer service.
- (1) Alpine S-A60M 600 Watt RMS Mono Car Audio Amplifier Subwoofer Amp Class-D. (1) Alpine RUX-KNOB.2 Remote Control Bass Knob For Select Alpine Amplifiers Amps. Specifications:
- Alpines Class D Amplifier Circuit. CTA-2006-B Power Rating: 330W RMS x 1 (4ohm, 14.4V 1% THD+N); 600W RMS x 1 (2ohm, 14.4V 1% THD+N)
- S/N ratio: >85dB (ref: 1W into 4 ohm), >105dB (ref: rated power into 4 ohm). THD+N 0.03% (ref 1W info 4 ohm). Frequency Response: 10Hz-400Hz (+/-3 dB). Damping Factor: > 1000
- Remote bass knob compatible (requires RUX-KNOB.2, sold separately)
- Fosi Audio M04 is a sub amplifier for the passive subwoofer, adopts TPA3116 chip, NE5532 op-amp, can provide 100watt output power for 4-ohm subwoofer or speaker, with smooth volume control knob.
- This amplifier improves the bass response of passive subs, can use a selector to switch to subwoofer bass amplifier or full frequency mono amplifier.
- Mini size and solid shell, built-in low pass filter for subwoofers with sub frequency control, it's practical and powerful.
- This Home Hi-Fi amplifier can get a deep, crisp, clean low-frequency sound effect in dedicated home theater systems and media rooms. Exclusively designed for the customers who pursue HiFi sound.
- What’s you get: Fosi Audio M04 Amplifier x1,19V/4.74A power adapter x1, AC Cord x1, user manual x1 and 18 months warranty and 24 hours after-sale service online to provide you a great shopping experience.
- With PBTL/SUB switch: convenient to use G2 PRO as full frequency amp or subwoofer amp, a SUB output is specially designed for active subwoofer. G2 PRO can connect to both passive and active subwoofers. And two G2 PRO can be used to drive left and right channel independently to avoid mutual interference.
- Max 300W output power: using TPA3255D2 amp chip and equipped with 32V/5A large power supply, enough to drive 320W passive speakers or subwoofers. It also has a good match with outdoor/ bookshelf/ computer/ desktop /ceiling /floor standing speakers.
- Best design and HiFi sound: with a gain switch to allow 2-level of output level setting (32/36 dB) and SUB frequency adjustment (40-300Hz). It also has built-in speaker protection circuit, low-pass filter to guarantee no audible noise even at high power output, SUB signal and amp can output at the same time to bring HiFi listening experience.
- Mini size with exquisite appearance: mono integrated class D amplifier, simple compact design but with powerful function, more fashionable and durable solid aluminum chassis, very suitable for HiFi home and desktop audio system use.
- G2 can be used as a sub amp or a mono channel amp. It has a mode switcher which can change between SUB and PBLT modes conveniently. Equipped with 19V 4.74A high quality power supply.
- Applications: ① G2 can be used as a subwoofer power amplifier for passive subwoofers; ② G2 can be used as a mono amp to drive single channel. You can use two G2 to drive left and right channel separately, which are known as PBLT / BTL Bridge amp. Compared with normal 2.0CH amps, it can ensure totally no interference between two channels and can provide higher power.
- It has a gain setting which allows 4-level of output level setting (20/26/32/36 dB). It can keep the purity of the sound and avoid the resistor influence. Besides, it also has a bass cutoff frequency control knob.
- It adopts TI TPA3116 and NE5532 op-amp, which can offer 100W high power and can drive most home sub and mono speakers. Its optimized circuit can ensure totally no background noise. Besides, it also built-in speaker protection circuit and low pass bass filter.
- Prompt and courteous customer service. For any questions you have, please feel free to contact us on Amazon.
- ❤ 【Hi-Fi Amp with Clean Sound Quality】M02 subwoofer amp adopts TPA3116 chip, NE5532 op-amp, can provide 100watt output power for 4 ohm subwoofer or speaker. No pop, no audible noise, dead silent when nothing is playing through it.
- ❤ 【Full-Frequency and Sub Bass Switchable 】With a selector can be switched to subwoofer bass amplifier or full frequency mono amp, can be connected to passive suboower/speaker.
- ❤【Mini Compact but Powerful】Built-in low pass filter for subwoofers with sub frequency control, small simple compact design but practical and powerful.
- ❤【Home Hi-Fi amplifier】Home Hi-Fi mono integrated class d amplifier, Exclusively designed for the customers who pursue HiFi sound; Ship with 19V 4.74A power adapter.
- ❤【High Quality After-sale Service】 With 18 months warrenty and 24 hours after-sale service online to provide you the great shopping exprerience.
- The subwoofer has a built-in low-pass filter, the output power can reach 220W (2 ohms, 20 Hz-120Hz, 0.04% THD, 18db/octave).
- Advanced circuit design, built-in speaker protection circuit, sturdy aluminum chassis.
- Using Texas Instruments TDA7498E chip, NE5532 operational amplifier. No popping sound, no audible noise, completely quiet when no sound is playing.
- Home Hi-Fi mono integrated Class D power amplifier, specially designed for customers who pursue HiFi sound quality.
- What's you get: TP-02 subwoofer amplifier x1, power adapter x1, AC power cord x1, user manual x1, 18-month global warranty and 24-hour fast customer service.
- CX-Series Amplifiers are the perfect combination of big power, bigger flexibility and true reliability!
- A variable 12dB crossover, KickEQ 6dB variable bass boost and a 24dB subsonic filter on mono amps gives you the control you want - to craft the sound you love.
- Mono KICKER CX Amplifiers are now stable down to one Ohm, giving you the freedom to put even more subs in your system!
- CX-Series amps include vertical and horizontal mounting hardware, so you can show off your install style!
- These powerful amps work with as little as nine volts of power from your battery, and as much as 40 volts (400 watts) of speaker-level input signal.
- KICKER 46CXA12001T CXA1200.1 1200 Watt RMS Mono Class D Car Stereo Amplifier Amp. Efficient Class-D amplifier. Three-second turn-on/off delay to eliminate unwanted interference. Variable 12dB crossovers provides control to dial in perfect sound. KickEQ 6dB variable bass boost for those additional low frequencies.
- 24dB subsonic filter for protection from potentially damaging frequencies. FIT+ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio. Accepts up to 40-volt input signal. Small footprint for easier installation.
- Compatible with CXARC Remote Bass Control. Vertical mounting hardware included for another unique look. Dimension (L x W x H): 15.75 inch x 9 inch x 4 inch. Weight: 7.75 lbs.
- Specifications: Power Rating: 4 ohms: 600 watts x 1 chan., 2 ohms: 1200 watts x 1 chan., 1 ohms: 1200x1 +/-10% chan.
- CXRC Remote Bass Capable (sold sep.). Dimensions: 12 in. (30,6 mm). Frequency Response: 25 - 200Hz. Input sensitivity: Low level: 250mV-10V ; High level: 1V-40V. Signal to Noise Ration: 95dB. Active Crossover: Variable Lo-pass 50Hz–200Hz, 12dB/octave. Subsonic Filter @ 25hz, 24db/octave. KickEQ Boost: Variable 0-6dB @40Hz.
- Class D MOSFET Monoblock Power Amplifier
- Peak Power at 1 Ohm: 388 Watts | RMS Power at 1 Ohm: 350 Watts
- Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz
- Featuring 4-Way Protection Circuitry and 8 AWG Power & Ground Input Terminals for Maximum Current Flow
- Stable at 1 ohm | Remote Subwoofer Level Control Included
- Hifonics ZG-1800.1D Class D Amplifier + Gravity Magnet Phone Holder Bundle
- Power Rating: 4 Ohms: 450 Watts x 1 2 Ohms: 900 Watts x 1 1 Ohms: 1800 Watts x 1
- Tone Control/Parametric EQ: Built-in bass control | PWM MOSFET Power Supply
- Electronic Equalizer | Onboard Electronic Crossover | High Level Input
- Dimensions: 10.5"L x 8.25"W x 2.375"H | Bass Remote Included
- Class-D Mono-block Subwoofer Amplifier, 1200 Watts Max Power, RMS 600 Watts x [email protected]; RMS 350 Watts x [email protected]
- Featuring a high-speed MOSFET power supply, premium grade internal components, as well as 4-way protection circuitry, the amplifier will safely operate at the highest levels of performance for hours on end. Highly efficient heatsinks keep the amplifier cool with a sophisticated new look.
- Recoil mono amplifiers come with bass remote control. Use it to customize your bass on the fly with just a turn of a knob.
- You'll have full reign over your amplifier with the built-in user control panel, featuring a bass EQ, and variable adjustment tunings for gain level, low-pass filter, and subsonic filter.
- Dimensions: 7.48" x 5.90" x 1.77"
- 1 Ohm Mono Car Subwoofer Amplifier
If you’re looking for mono amplifiers for subwoofer that won’t let you down, we have the solution for you. Regularly, we update our selection of products so that it reflects what matters most and is tailored to meet your individual needs.
The products are selected by expert reviewers. The expert reviewers have tested them in conditions catered towards your specific requirements as well. The reviews are open to the public, so you can trust that they know what they’re talking about when it comes to picking a new software solution!
For a supplier of high-quality mono amplifiers for subwoofer for your product, we have the perfect solution for you. Each product on our list is regularly updated so that it features only what’s important and is tailored to meet individual requirements – just let us know how much information or feedback you would like!