drone flight controllers

in this present post, we have comprehensively listed the drone flight controllers (the cost of which does not exceed $500). We regularly update this list with models produced by the market leaders. All items in our database are selected by our editors and updated on a regular basis.

The list of the top 15 drone flight controllers is given on this page will absolutely help you to grab your perfect match. Without spending much time, let’s start with reviews right now!

If you want a drone flight controllers that has all the basic features, this top list should be your best bet. It comes with an average rating of 4 stars after more than 1200+ customer reviews and it’s one our most popular items in recent times!

If you’re looking for the drone flight controllers available, look no further than this list! We’ve compiled 15 of our favorite options to help make your decision easier. If there’s something specific that is on your mind or just need some advice then keep reading below:

Top 15 List of drone flight controllers is given below

Finding the drone flight controllers is very important for them to get fit. To help you find the right one, we analyzed the best-selling products on Amazon and other online retailers. We took into consideration several factors, which include ease of use, durability, weight capacity, and how much space is available in your home.

We’ve consulted top experts who have in-and-out knowledge about the drone flight controllers. We chose a product with amazing features you haven’t heard of before, so we could provide your shopping experience with some variety! Our team filtered more than 100+ items to get this list done just right for ya.

SpeedyBee V3 F7 Flight Controller: 30x30 Drone FC Wireless Betaflight Configuration, Blackbox,Solder-Free Plugs,WiFi,Bluetooth for 3-6S 4" 5" FPV Racing Drone Cinelifter
  • [Wireless FC ESC Tuning]: 33% faster wireless data transfer than the last version. Update FC firmware wirelessly in just 1 minute! Connect via Bluetooth and fully configure any setting for Betaflight/Emuflight/INAV.
  • [Solder-free Installation]: Come with two installation methods,one side has plugs port for your digital video transmitter, receiver, camera, VTX, and GPS,4x LED plugs. Another side for soldering by yourself.
  • [Get Blackbox Data in 1 Minute]: With an optimized Bluetooth/WiFi chip, you just need to take your smartphone out, connect, and download your flight in 20 seconds.Come with 500MB super huge onboard Blackbox flash memory.
  • [More Features& Warranty]:Support up to 8 motors,Built-in 4 x LED plugs,Onboard 4-level battery life indicators. Feel free to contact us for help by scanning the QR code,or get help on Speedybee APP.
  • [SpeedyBee Advantage]: Download SpeedyBee App on your mobile devices, free to change the settings of flight controller and ESC anywhere without a computer.
SpeedyBee Mini F7 Flight Controller 3-6S 20x20mm Built-in Bluetooth Drone Stack Support Wireless Tuning for 2-4 Inch FPV Drone
  • The SpeedyBee Advantage: Download SpeedyBee App on your mobile devices, free to change the settings of flight controller and ESC anywhere without a computer.
  • Wireless FC ESC Tuning: Connect the SpeedyBee app via Bluetooth, configure the UART Ports,PID,OSD and every other settings on this flight controller and BLHeli_S ESC in this stack wirelessly.
  • Support Digital And Analog Fpv System: The flight controller supports various analog image transmissions above 5V and also compatible with DJI Air Unit and Caddx Vista.
  • Change Motor Directions Wirelessly- It’s convenient to change the motor directions just in a few simple steps on SpeedyBee app.
  • What You Get: SpeedyBeeF7MiniFlightController, Manual Card
SpeedyBee F7 Mini Flight Controller Stack 3-6S 20x20mm Built-in Bluetooth Drone Stack with 35A BLHeli_S 4 in 1 ESC Support Wireless Tuning for 2-4 Inch FPV Drone
  • The SpeedyBee Advantage: Download SpeedyBee App on your mobile devices, free to change the settings of flight controller and ESC anywhere without a computer.
  • Wireless FC ESC Tuning- Connect the SpeedyBee app via Bluetooth, configure the UART Ports,PID,OSD and every other settings on this flight controller and BLHeli_S ESC in this stack wirelessly.
  • Change Motor Directions Wirelessly- It’s convenient to change the motor directions just in a few simple steps on SpeedyBee app.
  • Support Digital And Analog Fpv System- The flight controller supports various analog image transmissions above 5V and also compatible with DJI Air Unit and Caddx Vista.
  • Real 35A BLHeli_S ESC- 6-layer 2oz PCB plus optimized circuit design equals stable and strong current output. The four-channel continuous 140A output can reach 30 seconds.
40pcs FPV Flight Controller Vibration Dampener, M2 Rubber Damper Balls Anti-Vibration Spacer Balls for RC F4 F7 Drone Flight Controller Stack
  • High quality soft mount Spacer Balls for FPV flight controller, make your quadcopter more stable.
  • Convenient stack spacers for you to build your flight controller stack
  • Easy to install, perfect fit, and significant vibration elimination.
  • Made of high quality rubber for lasting performance
  • Clean and functional dampener, great solution to any flight controller vibration.
QWinOut Newest PIKO BLX Betaflight Micro Flight Controller for DIY Indoor Mini Micro FPV Quadcopter Racing Drone F3 CleanFlight
  • PIKO BLX Micro Flight Controller FC for FPV Quad Race F3 CleanFlight
  • Designed nothing short of revolutionary, the PIKO BLX Micro Flight Controller changes everything - the true ultimate in the insanity fueled micro FPV racing scene.
  • Ultra light, astonishingly small and packed with massive levels of performance capability, the PIKO BLX is the one and only flight controller that is ready & waiting to devastate the micro FPV competition.
  • Unlike any other system available today, the PIKO BLX provides an all in one solution that brings forth the ultimate in simplified sophistication, utilizing industry leading technology that has never been seen in a system this compact.
T-Motor F7 Flight Controller, Faster Calculation Speed, Flight Controller Simplified F7 FC, All UART Support Telemetry and SBUS, with F55A PRO II AMD F45A V2.0, for DJI Drones, rc Drones
  • All UART support Telemetry and SBUS, no need to select specific UAR Telemetry connects to TX of UART SBUS connects to RX of UAR
  • ADC-CURRENT need connecting esc' S current interface to read current value. Uart 4 - Rx need connecting esc" S Telemetry to read telemetry data.
  • With F55A PRO II And F45A V2.0 The well-designed t-motor F7 flight control, combined with the F55A PRO II, will bring a brand new experience, which can be connected by a 10pin silicone cord, greatly reducing installation time and improving ease of use. (in addition, we also provide soft cable and glue shell for connecting other brands 4-in-1 ESC and flight control) Theele 7e0 r F55A PRO II
  • The first choiceforprofessionalcompetition
  • Tailor-madeforprofessionalpilots
T-MOTOR Velox F411 Lite FC Flight Controller Support 20x20mm and 30.5x30.5mm Installation Holes for FPV RC Racing Drone
  • TO SATISFY THE LIGHTWEIGHT---F411 FC, equipped with 5V 2A BEC, AT 7456E OSD chip, 8M black box
  • Double installation method---The FC support 20x20mm and 30.5x30.5mm installation holes(30.5x30.5mm installation holes can be removed to 20x20mm as required)
  • Three communication ports---Meet conventional equipment-receiver/analog vtx/GPS(Two hard serial ports, one can open the soft serial port)
  • Pecommended power combo V2207/2306 MOTOR Velox F411 Lite stack
  • Accessories included: FC*1, Connection wire*1, Sticker*2, Silicone shock-absorbing washer*8, QC PASS card*1
QWinOut V2.3 KK Flight Control Circuit Blackboard v5.5 KK Multicopter for 4 Axle DIY RC Drone Quadcopter Aircraft
  • NOTE: Have been burned to Quadcopter mode. Tested. (There's variety of firmware available for this controller, you will have load them due to your needs, only test program is loaded by default.)
  • 1. Simple structure, Easy to Maintain and Debug Control.
  • 2. Relying on potentiometer adjust gyro sensitivity.
  • 3. Full servo signal output, support normal ESC / analog servo.
  • 4. Support for single-axle / UFO, Y3 3-axle, Y4-type 3-axle 4 axle, 6 axle, V22 flight mode. Supports 4-axle "+" and "X" flight mode, support for six-axle "HEXA6" and "Y6" flight mode.
HGLRC Zeus F722 3S- 6S FC Flight Controller Built-in Barometer 16M Black Box for DJI FPV Racing Drone Hobby RC Quadcopters Multirotors
  • NOTE:Pls kindly check the attached wiring diagram and Youtbe to view the related welding video before operation.
  • Integrated LED controller allows quick programming of LEDs with the push of a button.
  • Maximum BEC 9V/2A and BEC 5V/3A output
  • Easy direct soldering for TBS NANO VTX,XM+ and TBS CROSSFIRE NANO Receiver (without ESC signal pad)
  • Integrated barometer and 16M black box , built-in Betaflight OSD to adjust PID
RC F4 Flight Controller 20X 20mm Stack 35A 4-in-1 ESC BLHeli_S 2-6S Mounting for RC FPV Racing Drone Quadcopter
  • Mini F4 Flight Controller :35A 4-in-1 ESC BLHeli_S 2-6S Flight Stack, 20X 20mm mounting hole
  • The Flight Controller Stack Suilable for RC FPV Racing Drone Quadcopter and most small four-axis rack installations
  • Durability:4 in 1 ESC uses high-quality MOS tube
  • Supports up to DSHOT600 protocol.
  • Main control chip: STM32F405RGT6 MPU: MPU6000 Barometer: BMP280
ZRM&E 20pcs M3 Anti-Vibration Standoff Rubber Damping Ball for FPV F4 F7 Flight Controller RC Drone, Purple
  • Package includes 20pcs M3 rubber damping balls.
  • These rubber damper balls can effectively help reduce the sensitivity of the flight controller and are a must-have item for pilots who pursue extreme flying.
  • Used in the latest F4 F7 flight controller on the FPV quadcopter frame to prevent vibration.
  • It is made of high-quality rubber with long-lasting performance, soft and elastic air plane with reduced vibration.
  • Rubber shock absorber ball height: 6.6mm/0.25 inch, maximum outer diameter: 6mm/0.23 inch, inner diameter 3mm/0.11 inch.
BETAFPV SPI ExpressLRS F4 1S 5A AIO Brushless Flight Controller with SMD Ceramic Antenna BT2.0 Connector for 65mm/75mm 1S FPV Brushless Whoop Drone
  • 【ExpressLRS】ExpressLRS is an open source RC link for RC applications. It is based on SX127x/SX1280 hardware combined with an ESP8285, ESP32 or STM32 for RX and TX respectively. This board integrated SPI ELRS 2.4 receiver to achieve long-distance flight for whoop racing drone
  • 【Classic Cross Shape】Different from most FC on the market, F4 1S 5A AIO FC adopts the classic cross shape fully mounting pattern compatible with the whoop frame on the current market. Weighs only 3.1g, this lightweight FC is the best choice for the weight-sensitive 65/75mm wheelbase micro whoop drones
  • 【Performance】BETAFPV F4 1S 5A SPI ELRS 2.4G RX AIO FC built-in 1S ESC with 5A continuous and peak 6A current (3 seconds), it will offer you a powerful flight on your 1S drones. Make your 1S drone flying longer and faster
  • 【SMD Ceramic Antenna】This flight control comes with a SMD ceramic antenna, which is more easier to install on your drones. Offer you a better performance on function, power, responsiveness and maximum weight savings
  • 【Notice】Since Betaflight has not yet released the official firmware that could supports the SPI ExpressLRS protocol, the current version is the Beta version. Please use the firmware and the CLI dump file we provided to recovery the FC board if needed
TCMM RC F402D 5V 2A 2-5s Flight Controller FC Built-in OSD Support PPM/Ibus/Sbus/Dsmx for FPV Racing Drone Quadcopter
  • ⭕〖 Professional 〗: Direct integration and firmware direct parts are compatible with the supported OSD module solution, integrated 5V BEC flight control supports direct power input, with more diverse wiring methods, simple installation and wiring. The flight controller has less noise and fewer oscillations across the throttle band without adding any delay.
  • ⭕〖 Advanced 〗:This flight controller is ready for anything with 4 uarts, black box and a powerful F4 processor to run it all. It has 35.5x36mm PCB with M3*30.5*30.5mm mounting holes. Weight: 6.6g.
  • ⭕〖High Quality〗: The flight controller is 100% new and it is produced by TCMM. It is well made and durable. The design of this flight controller focuses on quality. This is much more affordable.
  • ⭕〖 Fast Response 〗: MPU6000 gyroscope with SPI bus mode brings fast response time and excellent shock absorption effect. The flight controller has the STM32F405 main control chip, which can Support flight control to run flight calculation at 32K rate.
  • ⭕〖 Important Notes 〗: When using a PPM or SBUS receiver, you need to connect the 3-point jumper next to the upper pad to short the corresponding direction to detect the PPM or SBUS signal normally. SBUS signal configuration RX6, DSM configuration RX1.
iRCMATRC Stretchy Soft M3 Rubber Damper Balls Anti-Vibration Washer Damping Spacer for F4 F7 FPV Racing Flight Controllers RC Drone Accessories (60pcs) (Mix Color (Black, Blue and Purple))
  • Made of high quality rubber for lasting performance nice and soft and stretchy.
  • It fits for latest F4 F7 flight controllers which are with M3 assembling holes.
  • It is made of high quality rubber, color: blue, purple, black, weight: around 8g/pack.
  • Have these rubber spacers to take out vibrations and provide flexibility to the electronics.
  • Note: Not suitable for F4 with OSD 8K Flight Controllers.
Aocoda-RC F7 Mini Flight Controller 20x20mm Stack Mounting 3-6S Lipo OSD Barometer 16Mb Blackbox for FPV Quadcopter Drones
  • Aocoda-RC F7 mini Flight Controller Board : fits for FPV Quadcopter Drones
  • Main control chip: STM32F722RET6,MPU: MPU6500,Barometer: BMP280
  • Input voltage: 3-6S Lipo;Power output: 5V/2.5A, 9V/3A
  • >PCB size: 28x28mm, mounting hole 20mm;20x20mm Mounting
  • Firmware: inav_3.0.2_AOCODARCF722MINI

If you’re looking for drone flight controllers that won’t let you down, we have the solution for you. Regularly, we update our selection of products so that it reflects what matters most and is tailored to meet your individual needs.

The products are selected by expert reviewers. The expert reviewers have tested them in conditions catered towards your specific requirements as well. The reviews are open to the public, so you can trust that they know what they’re talking about when it comes to picking a new software solution!

For a supplier of high-quality drone flight controllers for your product, we have the perfect solution for you. Each product on our list is regularly updated so that it features only what’s important and is tailored to meet individual requirements – just let us know how much information or feedback you would like!